A Robust Adaptive Hydraulic Power Generation System for Jet Engines

The paper presents an innovative hydraulic power generation system able to enhance performance, reliability and survivability of hydraulic systems used in military jet engines, as well as to allow a valuable power saving. This is obtained by a hydraulic power generation system architecture that uses variable pressure, smart control, emergency power source and suitable health management procedures. A key issue is to obtain all these functions while reducing to a minimum the number of additional components with respect to the conventional hydraulic power generation systems. The paper firstly presents the state-of-art of these systems and their critical issues, outlines the alternative solutions, and then describes architecture, characteristics and performance of the hydraulic power generation system that was eventually defined as a result of a research activity aimed at moving beyond the present state-of-art in this fiel

A scalable data taking system at a test beam for LHC

We propose the installation of a data taking system at a test beam for the simultaneous test of LHC detectors, trigger and readout electronics, together with the development of the supporting architecture in a multiprocessor environment. A strong emphasis is put on a highly modular design, such that new hardware and software developments can be conveniently introduced for training and evaluation. One of the main thrusts of the project will be the modelling and system integration of different readout architectures, which are meant to provide a valuable training ground for new techniques. To address these aspects in a realistic manner, we propose to collaborate with two detector R+D projects

Using Linux PCs in DAQ applications

ATLAS Data Acquisition/Event Filter "-1" (DAQ/EF1) project provides the opportunity to explore the use of commodity hardware (PCs) and Open Source Software (Linux) in DAQ applications. In DAQ/EF-1 there is an element called the LDAQ which is responsible for providing local run-control, error-handling and reporting for a number of read- out modules in front end crates. This element is also responsible for providing event data for monitoring and for the interface with the global control and monitoring system (Back-End). We present the results of an evaluation of the Linux operating system made in the context of DAQ/EF-1 where there are no strong real-time requirements. We also report on our experience in implementing the LDAQ on a VMEbus based PC (the VMIVME-7587) and a desktop PC linked to VMEbus with a Bit3 interface both running Linux. We then present the problems encountered during the integration with VMEbus, the status of the LDAQ implementation and draw some conclusions on the use of Linux in DAQ applications. (18 refs)

Experience with fibre channel in the environment of the ATLAS DAQ protoype "-1" project

Fibre Channel equipment has been evaluated in the environment of the ATLAS DAQ prototype "-1". Fibre Channel PCI and PMC cards have been tested on PwerPC-based VME processor boards running LynxOS and on Pentium-based personal computers running Windows NT. The performance in terms of overhead and bandwidth has been measured in point-to-point, arbitrated loop and fabric configuration with a Fibre Ch annel switch. The possible used of the equipment for event building in the ATLAS DAQ prototype "-1" has been studied

Metadata for ATLAS

This document provides an overview of the metadata, which are needed to characterize ATLAS event data at different levels (a complete run, data streams within a run, luminosity blocks within a run, individual events)

Development of a PbWO4 Detector for Single-Shot Positron Annihilation Lifetime Spectroscopy at the GBAR Experiment

We have developed a PbWO4 (PWO) detector with a large dynamic range to measure the intensity of a positron beam and the absolute density of the ortho-positronium (o-Ps) cloud it creates. A simulation study shows that a setup based on such detectors may be used to determine the angular distribution of the emission and reflection of o-Ps to reduce part of the uncertainties of the measurement. These will allow to improve the precision in the measurement of the cross-section for the (anti)hydrogen formation by (anti)proton-positronium charge exchange and to optimize the yield of antihydrogen ion which is an essential parameter in the GBAR experiment

Determination of the scalar polarizabilities of the proton using beam asymmetry Σ3\Sigma_{3} in Compton scattering

The scalar dipole polarizabilities, $\alpha_{E1}$ and $\beta_{M1}$, are fundamental properties related to the internal dynamics of the nucleon. The currently accepted values of the proton polarizabilities were determined by fitting to unpolarized proton Compton scattering cross section data. The measurement of the beam asymmetry $\Sigma_{3}$ in a certain kinematical range provides an alternative approach to the extraction of the scalar polarizabilities. At the Mainz Microtron (MAMI) the beam asymmetry was measured for Compton scattering below pion photoproduction threshold for the first time. The results are compared with model calculations and the influence of the experimental data on the extraction of the scalar polarizabilities is determined.Comment: 6 pages, 5 figure